| NAME | IMAGE | USES |
|---|
| Hoe |  |
This tool is used to digging and to place concrete, cement mortar in head pan |
| Head Pan |  |
This one is used to transport materials |
| Masonry trowel |  |
This tool is used to place cement mortar |
| Measurement Tape |  |
This is used to measure |
| Plumb Bob |  |
This tool is used to check the vertical alignment of civil works |
| Wheel Barrow |  |
This tool is used to transport cement mortar or any materials. Sometimes it also be used to measure the quantites of materials for site level concrete mixing |
| Concrete Mixer |  |
This tool is used to thoroughly mix the concrete at site. |
| Vibrator | This tool is used to vibrate the concrete while pouring. For workability purpose, we all add water to concrete. To avoid that we are using vibrators. There are many types of vibrators | |
| Rubber Boots |  |
This one is used to prevent skin from chemical contact |
| Sand screening machine |  |
This tool is used to sieve sand at site. |
| Gloves |  |
This is used to avoid direct contact with dangerous tools, machines or to avoid any direct chemical material contact |
| Safety Glass |  |
Used for safety purpose while drilling, hacking/roughening, grinding |
| Bump Cutter/Screed |  |
This tool is used to level fresh concrete surface especially in slab concrete |
| Wooden Float/wooden rendering float |  |
This tool is used to give a smooth finish to the plastered area |
| Chisel |  |
This tool is used to remove excess or waste hard concrete |
| Crow Bar |  |
This tool is used in fomwork to remove nails from boards |
| Framing Square |  |
This tool is used in Brickwork, Plastering to check right angle |
| Framing Hammer |  |
This tool is used to drive and remove nails |
| Line Level |  |
This tool is used to check horizontal level in brickwork, plastering , flooring and tile works |
| Torpedo Level |  |
Combination of line level and framing square |
| Cordless Drill |  |
This tool is used to make pilot holes, replacing jumper (special type of drill should be used while drilling concrete) |
| Circular Saw |  |
This tool is used to cut woods in shuttering |
| Hand Saw |  |
This tool is used in wood works and shuttering |
| Block Plane / Jack Plane |  |
This tool is used in Door and window wood works |
| Flat Pry Bar | This tool is used in shuttering sometimes used to adjust the column formwork to align | |
| Earth Rammer |  |
This tool is used to level the ground |
| Ladder |  |
|
| Digging bar |  |
This tool is used to breakup and loosen the compacted / hard surface area |
| Polishers |  |
This tool is used to smoothen the surface (wood or marble flooring) |
| Measuring Wheel |  |
This tool is used to measure lengths. It varies by length |
| Measuring Box |  |
This tool is used to measure the cement and sand while site mix |
| Tile Cutter |  |
This tool is used to cut the tiles |
| Putty Knife |  |
This tool is used in putty finishing to limit the thickness of the putty. |
| Vacuum Blower |  |
This tools is used to clean the surface area from impurities (In flooring, Slab concrete etc.) |