NEED4ENGINEER.COM , ২০১১ সাল থেকে অলাভজনক ভাবে নির্মাণ কাজের বিভিন্ন বিষয় নিয়ে সেবা দিয়ে যাচ্ছে
Civil Quiz 6
What is say about friction between sample sizes to total item in a lot?
In a screw jcak, the effort required to lower the load is
A ship is berthed in a chamber and lifted by principles of buoyancy, such a chamber is called.
A map indicates roads, highways, towns and the interrelationship is an ______model
Originally, Rankine's theory of lateral earth pressure can be applied to only
The rise, in water level, which occurs during the transformation of the unstable shooting flow to the stable streaming flow is called hydraulic jump.
What is the product of sectional modulus and allowable bending stress called as?
Which of the following statements is correct with reference to an impeller with backward curved vanes?
The flow in which conditions do not change with time at any point, is known as
A body of mass m moving with a constant velocity v strikes another body of same mass m moving with same velocity but in opposite direction. The common velocity of both the bodies after collision is
The variety of pig iron used for manufacture of wrought iron, is
The lime which contains mainly calcium oxide and slacks with water, is
Self-cleansing velocity is
In a public building, the stairs should be located near the
Which of the following gradients exerts maximum influence on properties of steel?
LCA associated with a___
The end block of a beam has a rectangular section 100mm wide by 200mm deep, the force of cable is 200kn. Find the actual bearing pressure?
For a catchment area of 120 km2, the equilibrium discharge in m3/hour of an S-curve obtained by the summation of 6 hour unit hydro graph is
Submerged weight of a body is
The process of proper and accurate measurement of all concrete materials for uniformity of proportions and aggregate grading is called
The duty of a crop is 432 hectares per cumec when the base period of the crop is 100 days. The delta for the crop will be
A line joining some fixed points on the main survey lines, is called a
Most commonly used solvent in oil paints, is
Grit chambers of a sewage plant are usually changed after
Steel tamping rod of 0.6m length and 16 mm diameter is used for tamping of concrete.
If support B settles by 1mm downward, what is direction of rotation at point A?
The unit of pressure is ___________.
A strainer type well sunk through three previous layers intervened by three impervious aquicludes, draws water from
A transition curve when inserted between the tangent and the circular curve
The rate of doing work is known as
Minimum thickness of steining should be _________ cm.