NEED4ENGINEER
ব্লগ
ক্যালকুলেশন
নাম-ঠিকানা
এস্টিমেট
ম্যাটেরিয়াল
অন্যান্য
কুইজ
গ্যালারী
প্রশ্ন
চেকশীট
ম্যাথপ্যাড
লগ-ইন
Search by keyword
Civil Quiz 10
A levee on flood
increases the water surface elevation of the river at flood
decreases the surface slope of the stream above the leveed portion
increases the velocity and scouring action through leveed section
all of the above
Largest dimension of a rail is its
Height
Foot width
Head width
Any of the above
The berms when fully formed
reduce the absorption losses and prevents leaks
protect the bank from erosion because of wave action
provide a scope for future widening the channel
all of the above
For drainage pipes in buildings the test applied before putting them to use, is
Water test
Smoke test
Straightness test
All the above
The bricks which may be used to build wall but to be provided with plaster are
Ist Class
IInd Class
IIIrd Class
IVth Class
Which of the following is not a main element of framed structure?
beam
column
shear connector
lattice member
... _________ has 3 roles ;Trainer,Motivator and Facilitator
HRD manager
Junior engineer
Public relation officer
Supervisor
The flooring made with small pieces of broken tiles of china glazed or of marble arranged in different pattern, is known as
asphalt flooring
mosaic flooring
terrazo flooring
granolithic flooring
Which of the following hydraulic unit is used for transmitting increased or decreased torque to the driven shaft?
Hydraulic ram
Hydraulic intensifier
Hydraulic torque converter
Hydraulic accumulator
The property by virtue of which lime sets under water, is known as
Slacking
Setting
Hydraulicity
Calcining
If in a city, the maximum daily draft is 25MLD, fire draft is 35MLD and maximum hourly draft is 40MLD, what is the coincident draft?
60mld
40mld
25mld
35mld
"""Muram is a fine chips of marble"", is it true or false?"
TRUE
FALSE
none
all
The peaking factor is directly proportional to the population of the city.
TRUE
FALSE
Both A and B
None of the above
Among the following businesses, which business offers full control over foreign markets?
Exporting
FDI
Licensing
Franchising
If w is width of sleepers, s is sleeper spacing and d is depth of ballast then
d = (s - w)/2
d = (s - w)/3
d = (s - w)/4
d = (s - w)/5
The front view of an object is shown on which plane?
profile plane
vertical plane
horizontal plane
parallel plane
In which type of settling, sedimentation of discrete particles takes place?
zone settling
compression settling
hindered settling
discrete settling
Imhoff cone is used to measure
Total organic solids
Total solids
Total in organic solids
Settleable solids
Flexibility matrix is always:-
symmetric
non-symmetric
anti-symmetric
depends upon loads applied
State the Category under which the Financial Statements fall.
Purchase Control
Maintenance Control
Quality Control
Cost Control
The type of bearing plate used in all joints and on curves to give better bearing area to the rails is
Flat mild steel bearing plate
Mild steel canted bearing plate
Cast iron anti-creep bearing plate
None of the above
is the word that refers to morals, values, and beliefs of the individuals, family or the society
ethics
values
morality
norms
Which cement is mainly used for interior and exterior decorative works?
Rapid Hardening Cement
Colored Cement
High Alumina Cement
Low Heat Cement
The D-Alembert's principle is used for changing the dynamic equilibrium of a fluid mass, into a static equilibrium.
Agree
Disagree
Both A and B
None of the above
Which of the following is Not a principle of management given by Taylor?
Science, not rule of Thumb
Functional foremanship
Maximum ,not restricted output
Harmony not discord
A small quantity of _______ . % of gypsum is added to prevent flash-setting of the cement.
1 to 2
2 to 3
9 to 10
10 to 12
The unit of work in S.I. units is
newton
erg
kg-m
joule
In formwork for wall, the _____ are provided by vertical Struts and horizontal wales.
Studs
Wales
Sheets
Ties
Which one of the following does not belong to exogenous tree
deodar
pine
mahogany
bamboo
The thickness of each leaf of a cavity wall shall not be less than
5 cm
7.5 cm
10 cm
15 cm
In pretensioning system
the member is cast fist followed by tensioning of high-tensile wires
the member is prestressed by external anchors
the high-tensile wires are tensioned before placing concrete in forms
none of the above
need4engineer.com
, All rights reserved.
Designed By
HTML Codex