NEED4ENGINEER.COM , ২০১১ সাল থেকে অলাভজনক ভাবে নির্মাণ কাজের বিভিন্ন বিষয় নিয়ে সেবা দিয়ে যাচ্ছে
Civil Quiz 21
The maximum amount of pollution that each waterway could absorb is known as
When plates are exposed to weather, tacking rivets are provided at a pitch in line not exceeding (where t is the thickness of the outside plate).
The river flow during floods can be classified as
The formula V = (1/n) r2/3 ?? used for determining flow velocities in sewers is known as,
A coarse aggregate is one whose particles are of size
(i) tension members, (ii) long column, (iii) short column, (iv) connections
The maximum diameter of a bar used in a ribbed slab, is
The influence factor for rigid square footing is
How many types of turbines can you classify on the basis of direction of flow through runner?
If the compression zone contains part of precast element, the computation is done by considering?
The main task of this level of management is to determine the overall organisational objectives and strategies for their realisation.
If p1 and p2 are mutually perpendicular principal stresses acting on a soil mass, the normal stress to the principal plane carrying the principal stress p1, is:
In which process, excess lime is converted into bicarbonate?
The term _____appropriate? should emphasize the ______________and environmental protection of the host countries, and this need to be addressed while transferring technology
An object is placed in between projection planes, the front view and side view gives the same rectangle and top view is giving square the object is
The minimum diameter provided for the longitudinal bars is
If the distance from the focus is 2 mm and the distance from the directrix is 0.5 mm then what is the name of the conic section?
The ratio of plastic section modulus to elastic section modulus
is defined as conveying information by an employee on an important moral problem to somebody in a position to take actions on the problem.
Which of the following standard is considered good for business practices?
Bulk modulus of a fluid is the ratio of
The deflection of beams may be decreased by
Which among the following velocities cannot be found using the velocity triangle?
The portion of a brick cut to form angles other than right angles in plan, is known as
It is not an application of e-business.
Stress management is about learning
Functional departmentalization groups' jobs by which of the following?
If an object is placed in 3rd quadrant such that one of the surfaces of object is coinciding with both vertical plane and horizontal plane, what is the correct position of views from the following?
Discharge in inward flow reaction turbine
. _________ is a device which increases the intensity of pressure of a given liquid with the help of low pressure liquid of large quantity.
The difference between magnetic north and geographic north is: