NEED4ENGINEER.COM , ২০১১ সাল থেকে অলাভজনক ভাবে নির্মাণ কাজের বিভিন্ন বিষয় নিয়ে সেবা দিয়ে যাচ্ছে
Civil Quiz 24
A soil not fully consolidated under the existing over-burden pressure, is called
The shear stress between the two liquid layers is __________ proportional to the distance between two layers.
Two contour lines of different elevation do not cross each other.
Soundness of cement is tested by
Whenever workmen have to excavate in trenches in soil, soft rock or hard soil exceeding ... _________ m in depth, the trenches should be securely shored and timbered.
The probability of completion of any activity within its expected time is
Which of these reports involves the checking of a piece of equipment to see if it's still in working condition?
The siphon will work satisfactorily, if the minimum pressure in the pipe is __________ vapour pressure of liquid.
After the final grinding, the cement is sieved through IS sieve number
Who is responsible for the clean-up of oil spill?
Which among the following is formula for force when it acts along the direction of flow?
The correct relation between curve lead (CL), switch lead (SL) and lead of crossing (L) is given by
The water of a river has an important property called
Pick up the incorrect statement from the following. The underground sources of water, is from
means freedom from mistake or error
A Square pyramid is resting on vertical plane with base parallel to vertical plane. The side view will be
The water content of soil is defined as the ratio of
Talc is showing which type of luster ?
A point is 6 m away from the vertical plane and profile plane 5 m away from horizontal plane in 3rd quadrant then the projections is drawn on paper the distance between the front view and side view of point is
The perpendicular distance between the intrados and extrados of an arch, is called
Sphere shaped bacterias are called
According to ISI, bitumen is classified into
The melting point of silica is:
For setting out an offset at an angle of 45?,
Regarding manometric head (Hmano) which of the following relations is correct?
The maximum depth of sedimentation tanks is limited to
Which component of the clam shell responsible for opening and closing of the clam shell?
Gauging is _______
What affects volumetric efficiency of the pump?
LCA means that___
In a forced vortex, the velocity of flow everywhere within the fluid is