NEED4ENGINEER.COM , ২০১১ সাল থেকে অলাভজনক ভাবে নির্মাণ কাজের বিভিন্ন বিষয় নিয়ে সেবা দিয়ে যাচ্ছে
Civil Quiz 42
The perpendicular distance between the intrados and extrados of an arch, is called
Which of the following is responsible for quality objective?
Valley curves are required to be introduced at the situations where
Increase in population of a rapidly growing city, may be estimated by
A machine having an efficiency less than 50%, is known as
A part of pavement raised with respect to one side keeping the other side constant is called
In a screw jack, the effort required to lift the load is given by. Where W = Load lifted, ? = Helix angle, and ? = Angle of friction
In detritus tanks
The maximum quantity of calcium chloride used as an accelerator in cement in percentage by weight of cement is
For fixing the rail on steel sleepers
In ion-exchange process, the capital cost is _________ and the operational expenses are ______________
A sudden increase or decrease in shear force diagram between any two points indicates that there is
If in a rigid-jointed space frame, (6m + r) < 6j, then the frame is
Earliest finish of an activity is always
A point is 5 units away from the vertical plane and 4 units away from profile plane and 3 units away from horizontal plane in 1st quadrant then the projections are drawn on paper the distance between the front view and top view of point is
The _______ formwork is used for formwork when it is desired to reuse the formwork several times.
While solving an LP problem infeasibility may be removed by
A rectangle is placed parallel to profile plane which of the following projection is true?
Which of these materials is not added to iron for improving its oxidation resistance?
Specification does not specify or describes the nature and the class off the work, materials to be used in the work, workmanship, etc.
"""Standards are a horizontal component of the scaffolding."" is it true or false?"
Yellow light-hand signal indicates
Which of the following is not belonged to ellipse?
____________________ gas overestimates the rate of breathing and it is thus responsible for increasing the intake of other toxic gases.
In concrete walls, construction joints should be provided at the
What is the meaning of EMS?
What will be the FEM at point B in beam AB?
Which of the following errors is not eliminated by the method of repetition of horizontal angle measurement ?
If the depth of the cut of power shovel is too small than it cause _______ .
In an impulse turbine, the jet of water impinges on the bucket with a low velocity and after flowing over the vanes, leaves with a high velocity.