Top
রঙ এর গঠন তন্ত্র
কংক্রিট এর সেটিং
ভাল রঙ এর বৈশিষ্ট্য
কখন এবং কিভাবে রং করতে হয়
হ্যান্ড ডাই স্টক (Hand Die Stock)
Need4engineer
Toggle navigation
Home
Blog
Calculation
Addressbook
Estimate
Mathpad
More
Quiz
Galleries
Ask
Checksheet
Material
Addressbook
Log In
NEED4ENGINEER.COM , ২০১১ সাল থেকে অলাভজনক ভাবে নির্মাণ কাজের বিভিন্ন বিষয় নিয়ে সেবা দিয়ে যাচ্ছে
Civil Quiz 81
Strength of rubber belt for belt conveyors depends on_______
Number of plies
Size of belt
Type of rubber
Type of reinforcement
When exposed to fire, concrete has very little strength left after:
600oC
500oC
300oC
200oC
Hearting is the portion of a
brick cut across the width
wall not exposed to weather
brick cut in such a manner that its one long face remains uncut
wall between facing and backing
A four wheel truck or whose operating weight is 12000 kg is pulled along a road having a rising slope of 2% at a uniform speed. Assume grade resistance factor = 10 kg/tonne. The tension in the tow cable is 720 kg. The rolling resistance of the road will b
20 kg/tonne
40 kg/tonne
50 kg/tonne
30 kg/tonne
For transport of sample to laboratory, the sample is
wrapped in wax paper
given disturbance
mixed with other samples
saturated with lime
The preparation of surface of stone to obtain plain edges or to obtain stones of required size and shape is known as
Blasting of stones
Seasoning of stones
Dressing of stones
Quarrying of stones
The speed ratio of a Francis turbine is defined as the ratio of the theoretical jet velocity to the peripheral speed at inlet.
Yes
No
None of the above
Both A and B
Which type of pump should be used in order to handle low viscosity fluids?
displacement pump
end suction pump
submersible pump
centrifugal pump
If w is width of sleepers, s is sleeper spacing and d is depth of ballast then
d = (s - w)/4
d = (s - w)/5
d = (s - w)/2
d = (s - w)/3
Which line passes through a point, such that plane passing that point and the north and south poles, intersects with the surface of the earth?
Arbitrary Meridian
Magnetic Meridian
Survey line
True Meridian
EDM stands for:
Electronic Direct Measurement
Errorless Distance Measurement
Electronic Distance Measurement
Errorless Direct Measurement
The main disadvantage of cast iron sleeper is
that they are liable to crack
both (a) and (b)
that they are liable to get rusted
that they are liable to break
Pressure of liquid per unit area is called
Pressure intensity
pressure
force
force intensity
The capability of showing small angular movements of the level rube vertically, is called its sensitivity.
Right
None of the above
Both A and B
Wrong
The best method of interpolation of contours, is by
computation
estimation
graphical means
all of these.
The rail section which is not used on Indian Broad Gauge tracks, is
35 R
55 R
45 R
40 R
An intermediate T-beam reinforced with two layers of tensile steel with clear cover 13 cm encasted with the floor of a hall 12 metres by 7 metres, is spaced at 3 metres from adjoining beams and if the width of the beam is 20 cm, the breadth of the flange
236 cm
233 cm
176 cm
300 cm
If is the percentage of water required for normal consistency, water to be added for determination of initial setting time, is
0.75 P
0.70 P
0.80 P
0.85 P
Stock rails are fitted
near check rails
against check rails
against tongue rails
near tongue rails
Which one is not a type of light weight concrete?
no fine concrete
mass concrete
light weight aggregate concrete
aerated concrete
A line AB has its one say B end in horizontal plane and vertical plane then horizontal trace and vertical trace will coincide in______________line.
xy reference
above xy reference
vertical reference
below xy reference
Mr. W. Simms, the consulting Engineer to the Government of India recommended the gauge for Indian railways
1.676 m as a compromise gauge
1.800 m as per Indian conditions
1.435 m as adopted in England
1.000 m as a standard gauge
sensor IFOV is proportional to:
cos2
sec2
tan2
sin2
A line can't be perpendicular to two perpendicular planes at the same time.
FALSE
Both A and B
TRUE
None of the above
It refers to the process of instructing, guiding, counseling, motivating and leading people in the organization to achieve their objectives.
Organizing
Planning
Directing
Staffing
In which system of water supply, water is supplied only during fixed hours of the day?
fixed supply
low supply
continuous supply
intermittent supply
Pneumatic cassions used for a depth up to____________m.
25
30
45
35
Gypsum is added in the manufacture of Portland cement in order to
decrease the burning temperature
shorten the setting time of cement
decrease the grinding time
lengthen the setting time of cement
The decorative cap to the top of a newel post is called:
apron
easing
finial
fillet
A roof lantern is also called:
cupola
oriel
celestory
skylight