Top
রঙ এর গঠন তন্ত্র
কংক্রিট এর সেটিং
ভাল রঙ এর বৈশিষ্ট্য
কখন এবং কিভাবে রং করতে হয়
হ্যান্ড ডাই স্টক (Hand Die Stock)
Need4engineer
Toggle navigation
Home
Blog
Calculation
Addressbook
Estimate
Mathpad
More
Quiz
Galleries
Ask
Checksheet
Material
Addressbook
Log In
NEED4ENGINEER.COM , ২০১১ সাল থেকে অলাভজনক ভাবে নির্মাণ কাজের বিভিন্ন বিষয় নিয়ে সেবা দিয়ে যাচ্ছে
Civil Quiz 89
Which of the following statement is correct as regard to water wheels?
They give constant efficiency, even if the discharge is not constant.
all of the above
They have slow speeds.
They are suitable even for low water heads
A flow through an expanding tube at constant rate is called
Steady non-uniform flow
Steady uniform flow
Unsteady non-uniform flow
Unsteady uniform flow
A river meandering through an alluvial plain has a series of consecutive curves of reversed order connected with short straight sketches, is called
meandering length
crossing
none of these
meandering belt
The normal consistency of ordinary Portland cement is about
20%
30%
40%
10%
Which of the following is not the method of disposal of sewage from septic tank?
biological filters
vacuum filter
upflow anaerobic filter
soil absorption system
The oldest part of exogenous tree is
pith
sapwood
heartwood
cambium layer
Which of these problems can occur during de-watering of well?
Shifting of wells
All of the above
Tilting of wells
Sand blowing
Which of the following pump is sucessfully used for lifting water to the boilers?
Reciprocating pump
Jet pump
Air-lift pump
Centrifugal pump
Reciprocating pumps
Single stroke produce pulsating flow
Are not suitable for variable heads
Are four times costlier than centrifugal pumps
Are not suitable for pumping water containing sediments
4 PROJECTION OF SOLIDS WITH AXIS INCLINED TO HORIZONTAL PLANE AND PARALLEL TO VERTICAL PLANE
TRUE
FALSE
None of the above
Both A and B
In high rate activated sludge treatment, bacterias are removed from
40 to 60%
80 to 95%
20 to 40%
60 to 80%
A regular cone is placed on horizontal plane on its base the top view is
square
triangle
circle
rectangle
______ is the branch of civil engineering dealing with the behaviour of fluid when it is in motion, with reference to the force responsible for flow.
hydro kinematics
Hydraulics
hydro statics
Hydro dynamics
dimensionally homogeneous equation is applicable to
C.G.S. system only
All systems of units.
F.P.S. system only
M.K.S. and SI systems
The peaking factor is directly proportional to the population of the city.
FALSE
Both A and B
None of the above
TRUE
Hard water may cause bursting of boilers.
None of the above
Both A and B
Agree
Disagree
Splines are keys.
Both A and B
FALSE
TRUE
None of the above
Critical Path Net Work helps an engineer
To concentrate his attention on critical activities
To divert the resources from non-critical advanced activities to critical activities
All the above
To be cautious for avoiding any delay in the critical activities to avoid delay of the whole project
The colour of water is expressed in numbers of a
pO value
platinum cobalt scale
silica scale
none of these
If the surface of liquid is convex, men
Cohesion pressure is decreased
Cohesion pressure is increased
Cohesion pressure is negligible
There is no cohesion pressure
Which of the following bolt is not used in rail tracks?
Fish bolt
Rag bolt
Eye bolt
Dog bolt
Principles of management provide
methods and procedures.
rules and regulations.
general guidelines.
readymade solutions to problems.
"The keyword "" POSDC"" was given by :"
All of these
Koontz & O'Donnell
Fredrick Herzberg
Chesner Barnard
The curve used for ideal transition curve is a
cubic spiral
cubic parabola
clothoid spiral
lemniscate
Bar charts are suitable for
Large projects
Major works
Minor works
All the Above
When semaphore and warner are installed on the same post, then the stop indication is given when
Both semaphore and warner arms lowered
None of the above
Both arms are horizontal
Semaphore arm lowered but warner arm horizontal
What is the specific gravity of settleable particles in the grit chamber?
2.56
2.98
2.89
2.65
A 20 mm dia steel bar which is subjected to an axial tension of 2300 kg/cm2 produces a strain of cm. If Young's modulus of steel is 2.1 _____ 106kg/cm2, the bar is
In the elastic range
At yield point
In the plastic range
None of these
The hammer blow in pipes occurs when
The flow of fluid through the pipe is suddenly brought to rest by closing of the valve
There is excessive leakage in the pipe
The flow of fluid through the pipe is gradually brought to rest by closing of the valve
The pipe bursts under high pressure of fluid
The cracks caused by shrinkage of the exterior surface of the wood exposed to atmosphere, are called:
Twisted fibres
Wind cracks
Radial shakes
Heart shakes